9.5mm Gyproc Standard Plasterboard 1200mm x 2438mm

Product Code
MBMB103721
9.5mm Plaster Board
€18.99 €15.44
/ EACH
Delivery
Heavy Delivery unavailable
Click & Collect
757 Stock Available

Gyproc - 9.5mm Standard Plasterboard 1200mm x 2438mm

Gyproc WallBoard is a general purpose plasterboard suitable for most applications and use with Gyproc partition, wall lining and ceiling systems where basic fire, structural and acoustic levels are required.  Suitable for direct decoration or Gyproc plaster finish.

Key Features

Gyproc WallBoard is suitable for direct decoration or Gyproc plaster finish. Gyproc WallBoard still offers the same great performance and strength, but it is now lighter.

  • Gyproc WallBoard is now lighter
  • Offers a basic level of fire, structural and acoustic performance
  • Suitable for direct decoration or Gyproc plaster finish
  • Available in tapered and square edge; and range of bespoke sizes
  • Also available in Duplex variant

Cutting

This product may be cut using a plasterboard saw or by scoring with a sharp knife and snapping the board over a straight edge. Holes for switch or socket boxes should be cut out before the boards are fixed using a utility saw or sharp knife. When cutting boards, power and hand tools should be used with care and in accordance with the manufacturers€™ recommendations. 

Fixing

Fix boards with decorative side out to receive joint treatment or a skim plaster finish. Lightly butt boards together. Never force boards into position. Install fixings not closer than 13mm from cut edges and 10mm from bound edges. Position cut edges to internal angles whenever possible, removing paper burrs with fine sandpaper. Stagger horizontal and vertical board joints between layers by a minimum of 600mm. Locate boards to the centre line of framing where this supports board edges or ends.

Effect of temperature

Gyproc WallBoard is unsuitable for use in areas subject to continuously damp or humid conditions and must not be used to isolate dampness. Plasterboards are not suitable for use in temperatures above 49°C, but can be subjected to freezing conditions without risk of damage.