Hardwood Throughout Plywood

Hardwood throughout Plywood

Malaysian Hardwood Plywood

Manufactured from mixed hardwood veneers throughout. Malaysian Hardwood Ply CE2+ is a versatile product that combines an attractive surface appearance with superior performance under hazardous conditions

Malaysian Hardwood Ply CE2+ is suitable for interior and exterior use (in exterior use protect as recommended by TRADA) It has comparatively high strength to weight. It is manufactured from mixed hardwood veneers throughout for durability and stability. High density veneers are used for their structural strengths and are graded CE2 according to the European certification program

Used both in domestic & commercials buildings in applications including new build flooring and replacement flooring, walls, roofs, fascia and soffits ect.

Brazilian Hardwood Plywood

Brazilian Hardwood Ply CE2+ is a versatile product that combines an attractive surface appearance with excellent performance under hazardous conditions

Brazilian Hardwood Ply CE2+ is suitable for interior and exterior use (in exterior use, protect as recommended by TRADA) It has comparatively high strength to weight.

This product is manufactured from mixed hardwood veneers throughout for durability and stability. High density veneers are used for their structural strengths and are graded CE2+ according to the European certification program.

Used both in domestic & commercials buildings in applications including new build flooring and replacement flooring, walls, roofs, fascia and soffits ect.

Plywood Buyers

Plywood is an extremely versatile product. It is used for a wide range of interior, exterior and structural applications - from shuttering formwork through to internal finish grade plywood.

Plywood is basically a number of thin pieces of wood bonded together to produce a flat sheet. The biggest differences between each type of plywood are:

1. The overall thickness (6mm, 12mm, 18mm etc)

2. The type and quality of timber used (Birch, hardwood etc) and

3. The grade and certification standard of plywood specified (BB/BB, CE2+ EN636/2 etc)

Care and Handling of Plywood

General Storing and Handling

Plywood, like any other panel product, requires proper handling and storage. Despite its sturdy cross-laminated construction, face veneers, panel edges and panel corners are vulnerable to damage and should always be protected.

Plywood is manufactured at a low moisture content and while small changes in moisture content will not appreciably affect its dimensions, large changes should be avoided since they may encourage checking of the face veneer with consequent impairment of its qualities as a paint base. It is good practice to store plywood which is to be used for interior finish under conditions that approximate those it will experience in service.

Points to watch when handling plywood are:

1. Store plywood panels flat and level.

2. Keep finish faces inward and cover stacks to protect from bumping and abrasion.

3. Protect panel edges and corners. This is especially important with tongue and groove plywood.

4. Carry panels on edge (always being careful not to damage faces, edges and corners).

5. When plywood is used as a finishing material, deliver to job-site at the last possible moment.

6. Protect panels from sunlight, water or excessive humidity.

7. All cut edges should be sealed with a good quality varnish or oil based paint.