BROOKS IZOPERM SD5 INTERIOR AIRTIGHT MEMBRANE

BROOKS IZOPERM SD5 INTERIOR AIRTIGHT MEMBRANE

BROOKS VARAPLUS SD5 HIGH PERFORMANCE VCL & AIRTIGHT MEMBRANE

BROOKS VARAPLUS SD5 HIGH PERFORMANCE VCL & AIRTIGHT MEMBRANE

BROOKS IZOPERM SD5 INTERIOR AIRTIGHT MEMBRANE

IZOP1500
€140.42 €114.16
Availability: In stock
SKU
UN0826

HOME DELIVERY

Free nationwide delivery on all order over €250

CLICK & COLLECT

Click & collect from any of our 7 branches

Brooks Izoperm SD5 Interior Airtight Membrane 

Extrem ely strong high performance vapour control layer. Designed to be compatible with all conventional building systems and insulations.

ADVANTAGES:
 Elastic and durable
 Reinforced for optimum strength
 High performance air tightness
 Optimum SD Value for most constructions
 Durable towards UV and humidity ageing

Aplication Areas

IZOPERM Plus can be used as an inner airtight membrane and vapour control layer for externally vapour open build-ups. It can be used in roofs, walls, floors and ceilings in residential and commercial applications. 
IZOPERM plus is a vapour check with an Sd value of 5 (US Perm of 0.69). This provides optimal vapour control for most constructions. IZOPERM Plus is reinforced, flexible, compatible with all insulation types and does not shrink.

Aplication Process


IZOPERM Plus should be installed with the printed side facing the installer in a taught manner with all creases, seams, overlaps, joints and penetrations completely sealed. It should be installed so that all overlaps are sealed by taping to the printed side, and can be installed parallel or perpendicular to the supporting structure with maximum distances between supports of 1000mm (40”).
If installation is perpendicular to the supporting structures a batten is required or additional taping at 500mm strips perpendicular to overlap joints at 300mm (12”) intervals. IZOPERM Plus must overlap by 100mm (4”) and perpendicular battens should be installed to support the weight of insulation and to protect the product from future damage.

Staple in a triangular pattern to ensure the membrane is taught but make sure membrane is relaxed at junctions to allow for movement. Staple at 75mm (3”) intervals for blown in insulation or 300mm (12”) generally. Staples should be 10 mm (0.4″) wide and 8 mm (0.31″) long. Partel CONDUO can be used as an installation aid where staples cannot be used, Overlaps can then be sealed with VARASEAL, CONIZO, or CONEXO. Penetrations should be sealed using KABSEAL or BUTAFLEX and edge connections can be sealed with ACRABOND, ACRALINE or Partel tapes.
In cold climates blown in insulation should be installed as soon as IZOPERM Plus installation is complete and for loose fitted installation IZOPERM Plus should be fitted immediately after installation. Installation of vapour control layers in cold temperatures should make allowance for necessary heating, ventilation as adhesives and primers are water based, and adhesives will not adhere to wet surfaces. In high humidity situations >70% and cold temperatures visible water could be seen on the internal surface of IZOPERM Plus which prevents functionality.

General Information 
Connection joints should be free from tensile strain. Acrylic base adhesive tapes are pressure activated, sufficient pressure is required to ensure a long lasting bond. A smoother physical substrate will result in optimum adhesion between tape and surface. It is the responsibility of the applicator to check the substrate for suitability, adhesion tests are recommended in non standard situations. Use Acraprime to prime all rough, porous or dusty surfaces.

More Information
Length 50m
Width 1.5
Brand Partel
EAN 5391531750683
Manufacturers Code IZOP1500

DELIVERY T&C's

Brooks offers free delivery on online sales when you spend €250 or more. Please note due to the current restrictions we are only delivering locally & full nationwide delivery for large items is not available at this time.

Nationwide delivery is available on smaller items.  If you are unsure your area is covered please contact sales@brooksgroup.ie.  

For orders less than €250 there is a delivery charge of €50, this applies to items that would have to ship on a truck. For smaller items which can ship in a parcel there is a €12 charge, which will be calculated within the checkout process. 

Due to the high volume of orders at the moment delivery time is up to at least 5 days.

Brooks will only be offering a kerb side delivery service. 

The signature of the person accepting the delivery will be taken by the driver. All delivery dockets will be left for the customer to sign on a clipboard. Clipboards and pens will be sanitised after every use.

All drivers will be issued with adequate supply of masks, gloves, hand sanitiser spray disinfectant & pens.

We try delivering all our orders using Brooks vehicles however some deliveries may be shipped using a courier or haulage company.

All damages must be reported within 24 hours of delivery.

For any further questions or queries please feel free to contact us on 01 419 0099 or sales@brooksgroup.ie

Any price shown within this website is specific to the website and not necessarily reflective of the price in our branches.