BROOKS CONEXO FILM BASED TAPE 60MM X 25M

BROOKS CONEXO FILM BASED TAPE 60MM X 25M

BROOKS CONIZO SPECIAL PAPER BASED TAPE WITH SLIT LINER FOR WINDOW CONNECTIONS 60MM X 40M

BROOKS CONIZO SPECIAL PAPER BASED TAPE WITH SLIT LINER FOR WINDOW CONNECTIONS 60MM X 40M

BROOKS CONEXO FILM BASED TAPE WITH SLIT LINER FOR WINDOW CONNECTION 60MM X 25M

BROOKS CONEXO FILM BASED TAPE WITH SLIT LINER FOR WINDOW CONNECTION 60MM X 25M

BROOKS CONEXO FILM BASED TAPE 60MM X 25M

CONEX60
€22.47 €18.27
Availability: In stock
SKU
UN0830

SMALL PARCEL DELIVERY

This product qualifies for €12 Small Parcel Delivery
Free nationwide delivery on all order over €250

CLICK & COLLECT

Click & collect from any of our 7 branches

Conexo 60 Air & Windtight Tapes  
Sealing of membranes, windows, doors, corners, metals & timber

Application areas
Partel CONEXO is used to create permanent airtight seals for membrane overlaps, window and door connections, it is also suitable for corner connections. CONEXO can be used internally or externally because of its unique properties.

Adheres to all Partel interior and exterior membranes, concrete, plaster, wood, steel, other vapour control layers including PE, PA, PP and aluminium, wood base panels OSB, MDF, plywood.

Application process


Ensure surface is clear from dust, grease, and loose material. The substrate must to be dry and free from frost. Prime surface with Partel ACRAPRIME and allow sufficient time for primer to dry depending on conditions. This will eliminate dust particles and result with a better bond.

CONEXO SL version—Cut the required length for connection, use the SL (Split Linear) to create an L shape fold with tape and peel 12/20mm release liner from tape. Apply this 12/20mm fold to window/door frame. Thereafter peel second liner from tape and with sufficient downward pressure press tape onto substrate to activate acrylic adhesive, use Partel HELPING HAND to apply pressure evenly. For uneven surfaces Partel ACRALINE or ACRABOND may be used.

CONEXO version—Cut the required length for connection, peel the release liner from tape and with sufficient downward pressure press tape onto substrate to activate acrylic adhesive, use Partel HELPING HAND to apply pressure evenly.
AIR

Advantages
Adhesion to all Partel interior and exterior membranes, concrete, plaster, wood, steel, other vapour control layers including PE, PA, PP and aluminium, wood base panels OSB, MDF, plywood.
A smoother physical substrate will result in optimum adhesion between tape and surface

• High Performance airtight tape

• Optimum level of Acrylic adhesive with excellent ageing resistance

• Can be torn laterally for quick application

• Water repelling carrier • Split release backing on SL versions

• Adheres to timber, masonry, concrete, PVC, metal, Partel membranes

• Design life = lifetime

• Lowest VOC rating in hazardous substance test

General information
Connection joints should be free from tensile strain. Acrylic base adhesive tapes are pressure activated, sufficient pressure is required to ensure a long lasting bond. A smoother physical substrate will result in optimum adhesion between tape and surface. It is the responsibility of the applicator to check the substrate for suitability, adhesion tests are recommended in non standard situations.

More Information
Length 25m
Width 60mm
EAN 5391531750195
Manufacturers Code CONEX60
Datasheet (464.29 kB)

DELIVERY T&C's

Brooks offers free delivery on online sales when you spend €250 or more. Please note due to the current restrictions we are only delivering locally & full nationwide delivery for large items is not available at this time.

Nationwide delivery is available on smaller items.  If you are unsure your area is covered please contact sales@brooksgroup.ie.  

For orders less than €250 there is a delivery charge of €50, this applies to items that would have to ship on a truck. For smaller items which can ship in a parcel there is a €12 charge, which will be calculated within the checkout process. 

Due to the high volume of orders at the moment delivery time is up to at least 5 days.

Brooks will only be offering a kerb side delivery service. 

The signature of the person accepting the delivery will be taken by the driver. All delivery dockets will be left for the customer to sign on a clipboard. Clipboards and pens will be sanitised after every use.

All drivers will be issued with adequate supply of masks, gloves, hand sanitiser spray disinfectant & pens.

We try delivering all our orders using Brooks vehicles however some deliveries may be shipped using a courier or haulage company.

All damages must be reported within 24 hours of delivery.

For any further questions or queries please feel free to contact us on 01 419 0099 or sales@brooksgroup.ie

Any price shown within this website is specific to the website and not necessarily reflective of the price in our branches.